| Tester Feature |
LanScaper |
Fluke |
| Cable Test |
||
| Single Ended Test (Pre-test) |
Yes |
Yes |
| Number of Remotes (Identifiers) |
8 |
8 |
| Identifies Remote while Testing Cable |
Yes |
Sometimes* |
| Redundant ID (ID on more than 1 pair) |
Yes |
No |
| Complete Wire Map |
Yes |
No |
| Select Which Pins Have Tone |
Yes |
No |
| Test for Cable Shield |
Yes |
No |
| Split Pair Range (UTP cable) |
1.5 - 1500ft |
40 - 100ft |
| Length |
||
| Length Measurement Method |
Capacitance |
Capacitance |
| Adjust Length Constant |
Yes |
No |
| Length Range (CAT5/6) |
1-1500ft |
1-999ft |
| Length while Testing Cable |
Yes |
Yes |
| Tone Generation |
||
| Tone while blinking hub light |
Yes |
Yes |
| Different tone if no link established |
Yes |
No |
| Select Which Pins Have Tone |
Yes |
No |
| Number of different sounding tones |
4 |
1 |
| Network |
||
| Advertised Speed (Link Pulses) |
Yes |
Yes |
| Actual Speed |
No |
Yes |
| Load Monitor |
No |
Yes |
| Hub Blink |
Yes |
Yes |
| DHCP and manual addressing |
Yes |
Yes |
| Work with Phantom Power |
Yes |
No |
| Scroll Keys to set IP address |
4 |
2 |
| Jack ID |
||
| Report Phone Voltage |
Yes |
Yes |
| Report Type of Phone Line |
Yes |
No |
| Report Voltage Values / Map |
Yes |
No |
| Reports Hub/Switch Phantom Power |
Yes |
No |
| Miscellaneous |
||
| Display Type |
Alpha-Numeric LCD |
Graphical |
| Back Light |
Yes |
Yes |
| Character Height |
0.145 inch |
0.080 inch |
| Display organization |
2 lines x 16 Char. |
n/a |
| Display has indicator flags (icons) |
Yes |
n/a |
| Buttons |
8 |
3 |
| Operating Battery Life (Consumer Alkaline) to battery low indication |
||
| Battery Type |
9 volt |
2 x AA |
| Cable Test Only (w/o backlight) |
52hrs |
30hrs |
| Ping Test Only (w/o backlight) |
12hrs |
4hrs |
| Cost |
£195 |
$581(available in US) |
| * Only ID's remote if a passing 4-pair T568A/B or 4-pair cross-over cable |